The following devices can be used in accordance with the application standard Volkswagen TL 226:

The following devices can be used in accordance with the application standard ISO 11998:

The following devices can be used in accordance with the application standard EN 13300:

The following devices are in accordance with FED-STD 141C FTMS 141 method 2161:

The following devices are in accordance with FED-STD 141C FTMS 141 method 2162:

The following devices are in accordance with FED-STD 141C FTMS 141 method 6222:

The following devices are in accordance with FED-STD 141C FTMS 141 method 6223.1:

The following devices are in accordance with FED-STD 141C standards:

The following devices are in accordance with JIS Z 8741:

The following devices are in accordance with JIS K 5600-5-11:

The following devices are in accordance with JIS standards:

The following devices are in accordance with ASTM D6279:

The following devices are in accordance with ASTM D2486:

The following devices are in accordance with ASTM D3450:

The following devices are in accordance with ASTM D4213:

The following devices are in accordance with ASTM D4828:

The following devices are in accordance with ISO 105-X12:

The following devices are in accordance with DIN 55654:

The following devices are based on EN 13523-11:

The following devices are based on ASTM F1319:

The following devices are based on ISO 13803:

The following devices are in accordance with AATCC method 8-2007:

The following devices can be used in accordance with the application standard BMW AA-0134:

The following devices can be used in accordance with the application standard Volkswagen PV 3906:

The following devices are in accordance with AATCC standards:

The following devices are in accordance with Volkswagen standards:

The following devices are in accordance with BMW (Bayerische Motoren Werke) standards:

The following devices are in accordance with BS EN 12899 Annex A:

The following devices are in accordance with ISO 20471:

The following devices are in accordance with CUAP (ETA Request No 01.06/04):

The following devices are in accordance with CUAP standards:

The following devices are in accordance with DIN SPEC 91064:

The following devices can be used in accordance with the application standard ISO 16276-2:

The following devices can be used in accordance with the application standard ISO 4628-6:

The following devices are in accordance with DIN 67520:

The following devices are in accordance with the general basic principles of CIE 54.2:

The following devices are in accordance with the general basic principles of a CIE standard:

The following devices are in accordance with BS 3900-A6:

The following devices are in accordance with EN 13523-4:

The following devices are in accordance with EN 13523-14:

The following devices are in accordance with BS 3900-D6:

The following devices are in accordance with ISO 8254-1:

The following devices are in accordance with SN 640 511-3a:

The following devices are in accordance with BS 812-114:

The following devices are in accordance with ISO 8254-2:

The following devices are in accordance with ISO 8254-3:

The following devices are in accordance with BS 7976-3:

The following devices are in accordance with EN 1097-8:

The following devices are in accordance with ASTM D4039:

The following devices are in accordance with ASTM D1654:

The following devices are in accordance with EN 13036-3:

The following devices are in accordance with ASTM E2302:

The following devices are in accordance with DIN 50986:

The following devices are in accordance with DIN 53211:

The following devices are in accordance with DIN 54502:

The following devices are in accordance with DIN 55677:

The following devices are in accordance with DIN 55984:

The following devices are in accordance with DIN 67530:

The following devices are in accordance with ECCA T14:

The following devices are in accordance with ECCA T4:

The following devices are in accordance with EN 12899-1:

The following devices are in accordance with EN 13197:

The following devices are in accordance with EN 14086:

The following devices are in accordance with EN 1436:

The following devices are in accordance with EN 21524:

The following devices are in accordance with ISO 15184:

The following devices are in accordance with ISO 1519:

The following devices are in accordance with ISO 1524:

The following devices are in accordance with ISO 17872:

The following devices are in accordance with ISO 2409:

The following devices are in accordance with ISO 2431:

The following devices are in accordance with ISO 2808:

The following devices are in accordance with ISO 2811-1:

The following devices are in accordance with ISO 2813:

The following devices are in accordance with ISO 2814:

The following devices are in accordance with ISO 6272-1:

The following devices are in accordance with ISO 6860:

The following devices are in accordance with MIL C 27 227:

The following devices are in accordance with NEN 5350:

The following devices are in accordance with SIS 184187:

The following devices are in accordance with SNV 37100:

The following devices are in accordance with SNV 37113:

The following devices are in accordance with Tappi T 480:

The following devices are in accordance with Tappi T 653:

The following devices are in accordance with VDA 621-103:

The following devices are in accordance with ZTV M 13:

The following devices are in accordance with Zehntner:

The following devices are in accordance with EN 13036-4:2003:

The following devices are in accordance with EN 1463-2:

The following devices are in accordance with ECE 104:

The following devices are in accordance with DIN 55656:

The following devices are in accordance with ASTM E2540:

The following devices are in accordance with ISO 6272-2:

The following devices are in accordance with EN 471:

The following devices are in accordance with ISO 16862:

The following devices are in accordance with ASTM E2177:

The following devices are in accordance with ASTM E2176:

The following devices are in accordance with ASTM E1709:

The following devices are in accordance with ASTM E1710:

The following devices are in accordance with ASTM E1696: